AseptiQuik/無菌連接器 AseptiQuik STC
AseptiQuik STC Connectors integrate the AseptiQuik sterile connector and the Steam-Thru II SIP connector
AseptiQuik STC
AseptiQuikSTC連接器集成AseptiQuik無菌連接器和 Steam-Thru II 蒸汽滅菌連接器，從而使制藥商使用不銹鋼設備和一次性系統銜接時變得更靈活。AseptiQuik STC連接器是Steam-Thru II整合了一個AseptiQuik G或AseptiQuik C無菌連接器，可以直接通過衛生接口安裝到不銹鋼容器上。AseptiQuik STC連接器利用整合了的AseptiQuik G無公母的設計，大大簡化了無菌接口端的集成。同時AseptiQuik STC連接器整合了一個AseptiQuik C無菌連接器，允許系統進行公母無菌連接。AseptiQuik STC Connectors integrate the AseptiQuik sterile connector and the Steam-Thru II SIP connector, giving manufacturers with even greater flexibility for hybrid stainless steel and single-use processing. The AseptiQuik STC connector combines either an AseptiQuik G or AseptiQuik C sterile connector with a Steam-Thru II connection that can be mounted directly to a stainless steel vessel via a sanitary termination. AseptiQuik STC connectors utilizing an AseptiQuik G sterile connector offer a genderless design, simplifying system integration at the aseptic connector end. AseptiQuik STC connectors utilizing an AseptiQuik C sterile connector allow system designers to incorporate a keyed female-to-male connection at the aseptic connector end.
通過衛生接口將兩個接頭連接起來使AseptiQuik無菌連接器實現了與不銹鋼系統的一體蒸汽在位滅菌（SIP）。蒸汽在位滅菌（SIP）結束后，一系列的一次性系統可以與不銹鋼系統連接。SIP可以提前完成，通過一端的AseptiQuik實現快速和簡易的無菌連接，從而省卻了在收獲之前等待SIP的30-60分鐘的時間。The union of the two connectors into a single unit through a sanitary clamp allows an AseptiQuik sterile connection to be steamed on to stainless equipment via SIP. After the SIP cycle, a wide range of single-use systems can be connected. The SIP process can be done in advance allowing a quick and easy sterile connection to the AseptiQuik half without having to wait 30-60 minutes for SIP prior to harvest.
AseptiQuik STC Connectors Spec Sheet
功能與效益
AseptiQuik design
Innovative three-step connection process reduces risk of operator error
Genderless Design
Eases integration of single-use systems with universal mating between AseptiQuik G Connectors
Robust Construction
Repeatable and reliable performance with no additional hardware required
Patented Steam Valve Design
Allows sterile connection and disconnection to stainless equipment and permits a high media flow rate.
Sanitary Interface Between the Two Connectors
More secure connection than tubing with cable ties
CPC Click
Audible confirmation of assembly steps
Market Availability
Open access through multiple supply chain partners
產品規格
Pressure:
Steam Position: Up to 35 psi, 2.4 bar
Flow Position: Up to 20 psi, 1.4 bar
Temperature:
Steam Position: Up to 275°F ( 135°C) for 60 minutes
Flow Position: 39°F to 104°F (4°C to 40°C)
Materials:
Main Components: AseptiQuik - Polycarbonate (white), USP Class VI, ADCF
Steam-Thru II - Polysulfone (amber tint), USP Class VI, ADCF
Seals: Silicone (clear), platinum-cured, USP Class VI, ADCF
Pull Tabs: Polycarbonate (blue, standard version), USP Class VI, ADCF
Polycarbonate (white, HT version), USP Class VI, ADCF
Caps: Polypropylene (clear), USP Class VI, ADCF
Membrane: Polyethylene (standard version), USP Class VI, ADCF
Hydrophobic polyethersulfone (HT versions), USP Class VI
Clamp: Nylon 66 (white), USP Class VI
Sterilization:
Gamma: Up to 50 kGy irradiation.
Autoclave:
High Temp (HT) version:
Up to 266°F (130°C) for 30 minutes (AQSTC)
Up to 266°F (130°C) for 60 minutes (AQGSTC)
Note: a slight rotation of the clamp nut may be needed after autoclave.
WARNING: Pressure, temperature, chemicals and operating environment can affect the performance of couplings. It is the customer’s responsibility to test the suitability of Colder products in their own application conditions. Use the graph above as a guide.
Cv值
straigh-through Cv ~ 0.19 (2.74) max
single shut-off Cv ~ 0.08 (1.15) max
產品
 |
 |
AQGSTC2330900
3/4 Sanitary AseptiQuik G STC |
AQGSTC2330900HT
3/4 Sanitary AseptiQuik G STC - High Temperature |
 |
 |
AQGSTC2331000
1-1/2 Sanitary AseptiQuik G STC |
AQGSTC2331000HT
1-1/2 Sanitary AseptiQuik G STC - High Temperature |
 |
 |
AQSTC2330900
3/4 Sanitary AseptiQuik STC |
AQSTC2330900HT
3/4 Sanitary AseptiQuik STC - High Temperature |
 |
 |
AQSTC2331000
1-1/2 Sanitary AseptiQuik STC |
AQSTC2331000HT
1-1/2 Sanitary AseptiQuik STC - High Temperature |
3/4 Sanitary AseptiQuik G STC
AQGSTC2330900
3/4 Sanitary AseptiQuik G STC
3/4 Sanitary AseptiQuik G STC - High Temperature
AQGSTC2330900HT
3/4 Sanitary AseptiQuik G STC - High Temperature
1-1/2 Sanitary AseptiQuik G STC
AQGSTC2331000
1-1/2 Sanitary AseptiQuik G STC
1-1/2 Sanitary AseptiQuik G STC - High Temperature
AQGSTC2331000HT
1-1/2 Sanitary AseptiQuik G STC - High Temperature
Quick View3/4 Sanitary AseptiQuik STC
AQSTC2330900
3/4 Sanitary AseptiQuik STC
3/4 Sanitary AseptiQuik STC - High Temperature
AQSTC2330900HT
3/4 Sanitary AseptiQuik STC - High Temperature
1-1/2 Sanitary AseptiQuik STC
AQSTC2331000
1-1/2 Sanitary AseptiQuik STC
1-1/2 Sanitary AseptiQuik STC - High Temperature
AQSTC2331000HT
1-1/2 Sanitary AseptiQuik STC - High Temperature |
3180038393
